Too much foam
Beer that's too warm or pressure that's set wrong causes foamy pours.
Kegerator repair · Apex, NC
Kegerator Repair in Apex, NC With Same Day Visits
Foamy pours and warm beer ruin game night fast. Our techs repair home kegerators and beverage dispensers across Apex. We fix the cooling side, check the CO2 system and get your taps pouring right. Book same day service when we have openings, or call our 24-hour line for emergency leaks. If you need kegerator repair near me, few shops in the Triangle do this work. We do.
- Home kegerators
- Cooling and CO2 checks
- Same-day visits
- 24-hour phone line
Speak to a real person: (919) 646-8303
Foamy beer?It's often temperature, not the keg.
Know the signs
Signs Your Kegerator Needs Repair
Most kegerator problems show up in the glass first.
Flat beer
Low CO2 pressure or a leak in the gas line leaves beer flat.
Beer getting warm
A failing thermostat, fan or compressor can't keep the keg cold.
Hissing near the tank
A loose fitting or bad regulator can leak CO2.
Leaks at the tap
Worn faucet seals and couplers drip beer.
Ice on the coils inside
Too much frost means airflow or thermostat trouble.
Causes and fixes
Kegerator Problems and Fixes
We service both the cooling system and the draft system.
| What you notice | Likely cause | What we do |
|---|---|---|
| Foamy pours | Temperature above about 38°F | Repair cooling and set the right temperature |
| Flat beer | CO2 leak or regulator issue | Find the leak, replace seals or the regulator |
| Warm keg | Thermostat, fan or compressor | Test and replace the failed part |
| Dripping faucet | Worn faucet or coupler seals | Replace seals and clean the faucet |
| Frost buildup | Airflow or thermostat fault | Clear airflow and repair controls |
| Off taste | Dirty beer lines | Show you how to clean lines and change parts |
Before you call
Easy Kegerator Checks First
A few quick checks can solve common draft problems.
- Check the temperatureMost beers pour best around 36°F to 38°F.
- Check the CO2 gaugeAn empty or low tank means flat beer.
- Clean the linesLines should be cleaned about every two weeks of use.
- Give it airKegerators need space around the vents to stay cold.
Safety tip: Always keep the CO2 tank upright and secured, and close the tank valve before you disconnect anything.
If it's still warm or leaking, call us and we'll get it pouring right. Want to read more first? See appliance repair cost guide on our appliance repair blog.
Our process
How We Repair Kegerators
We look at the whole system, not just one part.
Cooling check
We test the thermostat, fans and compressor.
Gas system check
We check the regulator, lines and fittings for leaks.
Clear quote
You see the full price first.
Pour test
We confirm cold, clean pours before we leave.
Repair or replace
Repair or Replace a Kegerator?
A well-kept home kegerator can last 10 years or more. Seals, faucets, regulators and thermostats are low-cost parts that are almost always worth replacing.
If an older unit's compressor fails, the cost may be close to a new kegerator. We'll tell you plainly.
- Typical life
- About 8–12 years
- Best pour temp
- About 36–38°F
- Usually worth fixing
- Seals, faucets, regulators, thermostats
- Line cleaning
- About every 2 weeks of use
Brands we know
Brands We Service for Draft and Beverage Units
We service beverage and draft units from these brands and other makers.
-
GE appliance repair
Beverage centers
-
Frigidaire appliance repair
Compact coolers
-
Whirlpool appliance repair
Compact fridges
-
Viking appliance repair
Outdoor beverage units
-
Sub-Zero appliance repair
Built-in beverage units
-
KitchenAid appliance repair
Undercounter coolers
Related repairs
Related Beverage and Cooling Repairs
Where we work
Kegerator Repair in Apex and Nearby
We repair home draft systems in Apex and these nearby areas.
Questions and answers
Kegerator Repair Questions
Why is my kegerator beer so foamy?
Most often the beer is too warm or the CO2 pressure is set wrong. We can repair the cooling and help set pressure.
Do you repair kegerators in Apex?
Yes. We repair home kegerators and beverage dispensers in Apex and nearby towns.
What temperature should a kegerator be?
Around 36°F to 38°F works for most beers.
Can you fix a CO2 leak?
Yes. We find leaks in regulators, lines and fittings and replace worn seals or parts.
Do you fix outdoor kegerators?
Yes. We also repair outdoor-rated kegerators and beverage units on patios and decks.
Get Cold, Clean Pours Again
Call now for same-day kegerator repair, or use our form to book a repair. Learn more about our team, or visit our main page for appliance repair in Apex.